Why, oh WHY!?!

Why do people put their guns in fluffy cases, haul them in and out of the house, and forget to oil them since 1957?
This former SuperModel of an Ithaca Model 37R will now need refinished, its collectors value consigned to the ash-heap of history,

This is gonna feel (to me) like having to do reconstructive cosmetic surgery on a perky and firm 25-year-old Denise Richards(had she been hideously disfigured.).
Kinda depressing, and the results, while possiblt way cool, will NEVER be as sweet-assed as the original version was.

So here are the BEFORE pictures:






After discussion with the owner and the work is finished, I'll put up the AFTERs.

...and, while I'm thinking of it, DOLLHOUSE ROCKS. Nice job, Joss. We missed ya, buddy.

English to Gunsmith dictionary

Anybody know where I can find one to hand out to folks BEFORE I take in work?

Today's example:

(In English) "Can you clean my shotgun for me?"

(Gunsmith SHOULD hear) "I've kept this buried in my back yard for 2 years, and hadn't cleaned it for at least 10 years before that. I think the freeze/thaw cycle might have left a mark on the bluing; mechanical parts X, Y and Z also stick sometimes- can you make it look brand new, clean it, test it, and only bill me for 30 minutes of work?"

I'm just saying.

Perhaps $150 Mossbergs wouldn't become $20 Mossbergs (requiring $200 of work & parts!) if they had been fortunate enough to have been born Benellis- but somehow, I doubt it.

Having a truck gun is one thing-full of dirt & lint & kept in a soft case in your trunk for 3 weeks during first snow, well, not so hot.

Hey, on a n up note, check out the newish hat at the NRASTORE.

Veteran's Day 2008

Back during WWII, a young man in the US Marine Corps, Bill, was one of thousands tasked with taking the island of Iwo Jima. Operation Detachment, as the battle for Iwo Jima was called, was the only recorded USMC land battle of WWII where American casualties exceeded those of the Japanese. During one round of particularly heavy fighting, Bill had to use his empty .45 Colt (not an 1911A1, but a reissued and arsenal refinished M1911 from WWI) as a club, cracking the grips over some unfortunate Japanese fellow's noggin. Obviously, this M1911 had signifigant sentimental value for Bill.

None of this mattered to the thieves a few years ago that cleaned out his home of his .45 and his medals, amongst other valuables.

Being the cool old-fashioned guy he is, Sgt. Bill, even at age 82, tends to draw people close to him that are of similar morals and character. So it was not too surprising (to me, anyway) when one of his younger coworkers acquired a "bring-back" M1911 that had been "fixed up," and wanted it restored to its 1945 appearance (minus the rust that Bill's had from waterloggings during the landing.) The group that formed around this .45 decided to contact me for some input, as it became a small band of coworkers that would kick in on this project.



While not the exact same weapon, participation in this brewing sentimental gesture was too much for me to pass up. The collector's value of this gun was already ruined.

Our guest of honor for this post was born sometime between May and October of 1918.

Initial evaluation and discussion showed that the hideous target sights HAD to go. The pistol had also been "reblued," and while the chemical portion of the blue job was not terrible, the rounded corners and nearly invisible Colt prancing pony were NOT cool. Calling it overpolished is an understatement.



The supplier of the .45 (and friend of Sgt. Bill) included an era-appropriate rear sight with the pistol. How hard could it be to find a front sight that is the right size for a 1911? Enough that I ended up fabricating one.)

Rumour has it that in the 1940s, as the war was ramping up, several 1911s were put back into service after a nice black or gray parkerizing and arsenal refinish. These were issued to Marines, while Army guys recieved new production 1911a1s. Bill's, according to him during some (sneaky!) converstaions with his co-workers, was in fact, black phosphate coated.

So with clear goals in mind, I proceeded to remove the rear Millet-type sight, and the SOLDERED-ON ($^*%#@$#) front target sight. The frame and exposed parts (hammer, trigger, pins etc.) received a nice even sandblasting, and went directly into Mr. Park tank.
The slide got the kid glove treatment around the pony, and masking was destined to leave a shadow around it after inital stripping. Air on the blasting rig was turned down to 40 PSI from the normal 95, and our pretty pony got a couple of light licks. Masking ensued, and then the rest of the slide got blasting#1, followed by an acid bath to try to even up and deepen things a bit.
Blasting # 2 (Colt logo masked again) proceeded without a hitch, and then Mr. Slide took a steam 140 degree black manganese bath as well.



Being of a slightly different steel stock, the controls for the Colt came out a much deeper grey/black than the slide and frame did, which is ok, as I 'm sure that this was the case with many of the originals. the park went very light on the barrel hood, partly due to lockup and partly due to future work that will need done if this gets shot very much.

Where this pistol goes off on a "non-original process" tangent is right here.


I pulled an old (Brtitish?) trick that I read about somehwere here on da intergunwebz a while back (thank you to whomever it was that mentioned this.)

I commenced ta slather the slide and frame with a liberal application of gun grease, and said parts were then gently heated with a torch to open up the "pores' in the finish, allowing said grease to enter. Gradual heating continued until the grease was actually smoking, and evaporating off the surfaces of the parts. the parts darkened noticeably, and the phosphate coating took on a more smooth and even appearance.

The original 1911 that Sgt. Bill would have carried saw time underwater and rusted because of it.
As this is bound to be a piece with sentimental value as well, there is no need for this Colt to EVER see a new bit of rust. As long as someone can manage to oil the barrel and exposed trigger surfaces from time to time, it never will, either. A nice layer of FX7 inside the slide rails and back of the controls saw to the protection of the internals. The newly-fabbed front sight joint was sealed with a couple of small drops of matte black DuraCoat after installation.

Reassembly was followed up with a nice oil rubdown. The shadow around Pony was not as prominent after the grease/smoking, but there is a shadow. the goal was to leave the Pony visible, and it can still be seen. The front sight may not be 100% accurate, but it is darn close, and I did not have time to try and get Colt to install one off of their current 1911 production run (send in the slide. RIGHT.)



This was by FAR my favorite "rush-job," EVER.
I hope the grips that were located for it are similar to what he had, and that the overall feel is and appearance are as they should be.



Thank you, Sgt. Bill, God Bless and keep you, and happy Veteran's Day.

Thanks to the rest of you as well.

Fantastic Tips On Cold Blue Touch Up-

-Personally, I hate using it on anything more than a hammer or other control unless it is the only option, and would rather parkerize & clear-coat a part, or park &  oil-soak it, then smoke off the grease or oil.

However, if you have to use the stuff, Brigid is right on the money.

Suck it, Ike.

For days now, I have been trying to decide if I would post this or not, as I have no excessive cash (I abhor using credit) nor excessive time to spare, but here goes:

For the balance of 2008, anyone who sends me a rusty, muddy, crudded up gun that was damaged by flooding from either Gustav or Ike will get a hell of a deal.

(If you tell anyone I'm nice, I will make you suffer.)

Your cost for an oxide blasting (de-rusting) and single color (either matte black or gun blue) DuraCoat  refinish/salvage job on any handgun or long gun will be $20. The weapon will need to be from a flood victim, not just some pawnshop/truck gun. I cannot and will not attempt to salvage a damaged bore or chamber, and if you have let the springs get so bad that they are unserviceable, I will not replace them without charging for it. I may even opt to send it back tagged "unsafe to fire," (and I take and keep photos.) I am not a wood guy, but will do what I can, or can skip it.

If you had no insurance on your guns, or you have one that you are not willing to turn in to insurance for replacement, or if your insurance people are just a nightmare to deal with, then shoot me an email. I rarely answer the phone, but will return messages left in voicemail.

Keep in mind it is cheaper for me to receive and return a handgun from another FFL than it is a non-licensee. You will pay me $20 to cover materials, and you will pay the actual return shipping. (A $20 bill is acceptable, so is one ounce of silver, in lieu of US Federal Play Money.)

If you no longer have a physical address for a firearm to come FROM, find a dealer to ship it from, so I can ship it back when done.

(FFLS-Enclose a copy, and you get one back when the item is returned.)

As long as your firearm is still serviceable when I get it, the action will be clean and mostly waterproof when you get it back, and oiled or greased where it is not.

I reserve the right to cut this offer off at any point, especially if I get overwhelmed.  Existing customers will come first, as will any that pay the bills, and I reserve the right (at this price) to turn these around as I see fit. (I have a life, too.)

This is NOT charity, screw you if you would consider it such. 

Each weapon will be returned with a stack of business cards that I expect to be handed out.

I do you a solid; you do me a solid. That's how it works. 

Send referrals, folks, or "real" work once your life is back in order and you want fun stuff done.

Anyone trying to pull a fast one and take advantage will find their name and contact information posted everywhere online I can post it, so scammers beware. I may offer other options on a case-by-case basis, as I see/handle each item. If you have other metal gear that needs help, like stacks of magazines, ask me.

This topic is not open to comment.